Microstrip Maximum Current Calculator
Note: Use this calculator to find the max current capacity of a microstrip from trace width, trace thicknesses, temperature rise, and length of microstrip.
Click here to view image
Imax Maximum current carrying capacity of microstrip
T Trace Thickness
W Trace width
ΔT Temperature Rise
L Trace Length
ρcu resistivity of Copper = 1.7 x 10-6
αcu temperature coefficient of Copper = 3.9 x 10-3
Tamb Ambient Temprature
According to IPC-2221A Par. 6.2 (“Conductive Material Requirements”), their values for inner layers are
k 0.48
b 0.44
c 0.725
Microstrip: Microstrip is a PCB trace over a ground plane with dielectric material above it. Models have been created to approximate the characteristics of the microstrip transmission line. A good approximation is provided by the formulas contained in the document IPC-2141A. Microstrip is the conducting medium used to transmit the electric signals at microwave frequency and fabricated using PCB - printed circuit board. Usually, Microstrip separated from the ground by using a dielectric substrate to avoid unnecessary interferences. Microstrips are very light and low power consuming components used in microwave technology such as antennas, couplers, etc.
Microwave antennas and couplers as well as some filters can be created using the microstrip. However, microstrips cannot handle power levels as high as waveguides can. Microstrips also have issues in power loss, cross-talk, and unintentional radiation because they are not enclosed like the waveguide. Embedded microstrips also find themselves in high-speed digital PCB designs where entail signal travel with minimal distortion and no cross-talk and/or radiation is required.
Microstrips are also subject to maximum ratings. Microstrips are similarly used as capacitors and inductors as well as tuned circuits, filters, phase shifters. This calculator is used to find the maximum current carrying capacity of a microstrip.
